Engineering and Computer Science Faculty Publications
Publications from 2013
Development of an Energy Efficient Driving Strategy for a Fuel Cell Vehicle over a Fixed Distance and Average Velocity, S. M. H. Syed Omar, N. M. Arshad, M. H. A. Mohd Fakharuzi, and Thomas Ward
Aircraft Performance of Kenyalang Fuel Cell UAV, Noor Idayu Mohd Tahir, Wahyu Kuntjoro, and Thomas Ward
Technical and Economic Analysis of Renewable Energy Powered Stand-alone Pole Street Lights for Remote Area, A. Ali Wadi, R. Saidur, Thomas Ward, and N. A. Rahim
The Relationships Between Femoral Cortex Geometry and Tissue Mechanical Properties, Y. N. Yener, C. U. Brown, T. A. Gruen, and Timothy L. Norman
Publications from 2012
Energy and Emission Analysis in the Malaysian Food Industries, M. B. Ali, R. Saidur, M. Hasanuzzaman, and Thomas Ward
Spherical Antenna Design for Satellite Communications, L. Burchett, Luke Fredette, L. Wilson, and J. Terzuoli
Nicotine Increases Osteoblast Activity of Induced Bone Marrow Stromal Cells in a Dose-Dependent Manner: An in Vitro Cell Structure Experiment, Scott D. Daffner, Stacey Waugh, Timothy L. Norman, Nilay Mukherjee, and John C. France
Behavior of Pultruded Large Diameter Thin-Walled Orthotropic Cylindrical Tubes, D. W. Dispennette and David Dittenber
Effect of Alkalization on Flexural Properties and Moisture Absorption of Kenaf Fiber Reinforced Composites, David Dittenber
Critical Review of Recent Publications on Use of Natural Composites in Infrastructure, David Dittenber and Hota V.S. GangaRao
Fatigue Equation Considerations for the American Society of Civil Engineers Pre-Standard for Load and Resistance Factor Design of Pultruded Fiber-reinforced Polymer Structures, David Dittenber and Hota V.S. GangaRao
Hybrid Modal Damping Identification for Bladed Diskes and Blisks, Darren E. Holland and Bogdan I. Epureanu
Structural Damping Identification for Mistuned Bladed Disks and Blisks, Darren E. Holland, Bogdan I. Epureanu, and Sergio Filippi
Measurement Point Selection and Modal Damping Identification for Bladed Disks, Darren E. Holland, J. R. Rodgers, and Bogdan I. Epureanu
A Study on Propeller Performance of a Fuel Cell Powered Propulsion System, N. Jenal, Thomas Ward, W. Kuntjoro, M. R. Aziz, and N. V. David
Step 4: Electrical Design, A. Koch, Gerald M. Brown, and Timothy B. Dewhurst
Step 5: Total Integral Design, A. Koch and Timothy B. Dewhurst
Step 2: Hull Shape, Propulsion System, and Attachment of Solar Panels, J. Oakes and Timothy B. Dewhurst
Step 3: Hull Layout and Particulars, Structural Analysis, and Solar Panel Layout, J. Oakes and Timothy B. Dewhurst
Phased Array Reciever Filtering and Demonstration of Digital Beamforming on Measured Wideband Data, Danielle Scarpone, Jeremy Stringer, and Geoffrey Akers
Graphical Synthesis of Fourbar Mechanisms by Three-position, Instant-center Specification, Thomas J. Thompson
Common Elements of Capstone Projects in the World’s Top-ranked Engineering Universities, Thomas Ward
Design and Flight Analysis of the Kenyalang-1 Fuel Cell Powered Unmanned Aircraft, Thomas Ward
Cedarville University Solar Splash Technical Report 2012, B. Yeh and Timothy B. Dewhurst
Publications from 2011
Energy: Properties and Policy Issues, Robert Chasnov
An Energy Use and Emissions Inventory, Robert Chasnov and Mark Gathany
Cutting Away from the Power Grid, Robert Chasnov and Mark Gathany
Hybrid Gauss Pseudospectral and Generalized Polynomial Chaos Algorithm to Solve Stochastic Optimal Control Problems, G. C. Cottrill and Frederick G. Harmon
Development of a Solar Array Testing Facility, Timothy B. Dewhurst
Low Cost Environmental Testing of Composite Materials for Seawater Applications, David Dittenber
Critical Review of Recent Publications on Use of Natural Composites in Infrastructure, David Dittenber and Hota V.S. GangaRao
Exploring the Fourth Dimension: a Computer Scientist's Experience in Temporal Display Development, Patrick P. Dudenhofer
Portraying the Passage of Time in a Timeline Interface for Supervisory Control, Patrick P. Dudenhofer
Achieving the Air Force’s Energy Vision, Frederick G. Harmon, R. D. Branam, and D. E. Sandlin
Measurement Point Selection and Modal Damping Identification for Bladed Disks, Darren E. Holland, J. R. Rodgers, and Bogdan I. Epureanu
Formula SAE Rules, Jay H. Kinsinger
Performance Analysis of Different Fuel Cell Lightweight Vehicle Power Configurations While Operating on an Inclined Road, M. H. A. Mohd Fakharuzi, Thomas Ward, and R. Atan
On the Apparent Particle Dispersion in Granular Media, Zhaohui (George) Qin, Rodney Fox, Shankar Subramaniam, Richard Pletcher, and Lei Zhang
Particle Impact Theory Including Surface Asperity Deformation and Recovery, Zhaohui (George) Qin and Richard H. Pletcher
Chameleon: An Adaptive Instructional IDE, Keith A. Shomper and M. P. Erikson
Cedarville University Solar Splash Technical Report 2011, T. Smidt and Timothy B. Dewhurst
UAS Collision Avoidance Algorithm Based on an Aggregate Collision Cone Approach, A. L. Smith and Frederick G. Harmon
CedarScope, Timothy R. Tuinstra
Fluke 41B Interface, Timothy R. Tuinstra
Flight Studies of Hydrogen Fuel Cell Powered Propulsion Systems on an Unmanned Aircraft, Thomas Ward and J. Weigi
Publications from 2010
Fatigue of Polymer Composites: Life Prediction and Environmental Effects, David Dittenber
Bedford Composite Mat Fatigue Test, David Dittenber and Hota V.S. GangaRao
Bedford Composite Mat (II) Fatigue Test, David Dittenber and Hota V.S. GangaRao
Evaluation of a Life Prediction Model and Environmental Effects of Fatigue for Glass Fiber Composite Materials, David Dittenber and Hota V.S. GangaRao
Evaluation of Fatigue Life Prediction Model for GFRP Composite Materials, David Dittenber and Hota V.S. GangaRao
Step 4: Electrical Design, Z. Hanna, Timothy B. Dewhurst, and Gerald M. Brown
Damping Identification for Mistuned Blisks, Darren E. Holland, Bogdan I. Epureanu, and Sergio Filippi
Testing and Calibration Procedures for Mistuning Identification and Traveling Wave Excitation of Blisks, Darren E. Holland, Sergio Filippi, Matthew P. Castanier, Steven L. Ceccio, and Bogdan I. Epureanu
Step 3: Hull Construction, A. Kirchinger and Timothy B. Dewhurst
A Geospatial Narrative Framework: Breathing New Data into Historical Manuscripts, George V. Landon, William J. Landon, and Christian L. Snodgrass
A Flow Intensification Model for Granular Filter Applications, Zhaohui (George) Qin
Chameleon: An Adaptive IDE for Early Programming Instruction, Keith A. Shomper and Mark Erikson
Step 2: Hull Shape, Propulsion System, and Attachment of Solar Panels, M. Steinbach and Timothy B. Dewhurst
Step 5: Total Integral Design, M. Steinbach and Timothy B. Dewhurst
Cedarville University Solar Splash Technical Report 2010, M. Steinbach, Timothy B. Dewhurst, and R. Hokuf
Specification of Prosthetic Knee Kinematic Design Parameters Using a Three-Position, Instant-Center Specification Approach, Thomas J. Thompson
God and Claude Shannon: The Design and Origin of Error Coding in Living Systems, Timothy R. Tuinstra
Kenyalang-1 Unmanned Aircraft Fuel Cell Powerplant Technology Demonstrator, Thomas Ward
Design and Initial Flight Tests of a Hydrogen Fuel Cell Powered Unmanned Air Vehicle, Thomas Ward and N. Jenal
Publications from 2009
Nicotine Increases Osteoblast Activity in In Vitro Cell Culture in a Dose Dependent Manner, Scott D. Daffner, John France, Chad Smalley, Stacey Waugh, Timothy L. Norman, Nina Clovis, Suzanne Smith, Vincent Kish, and Nilay Mukherjee
Cedarville University Solar Splash Technical Report 2009, T. J. Dewhurst, M. Veldt, and Timothy B. Dewhurst
Low Dose Nicotine Exposure Improves Posterior Spinal Fusion in an In Vivo Rabbit Model, John C. France, Scott D. Daffner, Chad Smalley, Stacey Waugh, Timothy L. Norman, Nina Clovis, Suzanne Smith, Vincent Kish, and Nilay Mukherjee
Testing and Calibration Procedures for Mistuning Identification and Traveling Wave Excitation of Blisks, Darren E. Holland, Sergio Filippi, Matthew P. Castanier, Steven L. Ceccio, and Bogdan I. Epureanu
Toward Digitizing All Forms of Documentation, George V. Landon
A New Technique for the Digitization and Restoration of Deteriorated Photographic Negatives, George V. Landon, Duncan Clarke, and W. Brent Seales
New Methods for Rock Art Recording and Virtual Analysis, George V. Landon and W. Brent Seales
Fatigue Characterization of Owens-Corning Windstrand Composite Material, Part III – Accelerated Immersion Conditioning, R. Liang, David Dittenber, and Hota V.S. GangaRao
Fatigue Characterization of Owens-Corning Windstrand Composite Material, Part II – Tension-Tension Fatigue, R. Liang, David Dittenber, and Hota V.S. GangaRao
Publications from 2008
Introduction and Acceptance of a Classical Charge Fiber Model (CFM) of Elementary Particles Evaluated by Means of an Online Tutorial-Based Survey, Gerald M. Brown
Role of CFD in Undergraduate Research in the Design of a Supermileage Competition Vehicle, Peter Burban, Harwood A. Hegna, and Lawrence D. Zavodney
Engineering Curricula: Is the Global Warming Debate "Hot" Enough to Displace Current Content?, Robert Chasnov
Heating up the Engineering Curriculum to Include the Science Behind the Global Warming Debate, Robert Chasnov
Cedarville University Solar Splash Technical Report 2008, T. J. Dewhurst and Timothy B. Dewhurst
Innovative Approaches to Providing Developing Countries with Appropriate Lower-Limb Prosthetic Technology, David Dittenber, S. R. Ayers, and R. V. Gonzalez
A Simulated Mano Machine An Novel Project For Computer Architecture Class, Vicky Fang and Clinton E. Kohl
Fatigue Characterization of Owens-Corning Windstrand Composite Material, Part I – Bending Fatigue, Hota V.S. GangaRao, R. Liang, and David Dittenber
Innovative Biomedical Design Competitions and Scenarios Exploring Underserved Populations, B. S. Kelley, David Dittenber, S. R. Ayers, R. V. Gonzalez, J. R. Goldberg, and R. Malkin
A New System to Acquire and Restore Document Shape and Content, George V. Landon, W. Brent Seales, and Duncan Clarke
Age-related Changes in Porosity and Mineralization and In-service Damage Accumulation, Timothy L. Norman, T. M. Little, and Y. N. Yener
Culturally-Appropriate Engineering Design for Developing Countries, Thomas J. Thompson and Lawrence D. Zavodney
On Providing Engineering Students with Culturally-Appropriate Design Experiences in Developing Countries, Thomas J. Thompson and Lawrence D. Zavodney
Clinical Engineering: Applying a Machine Learning Approach to Tumor Malignancy Prediction, B. Tseng and Tim Shee Yao
Clinical Engineering: Applying a Machine Learning Approach to Tumor Malignancy Prediction, Tim Shee Yao
Improvement of RFID Impedance Sensor for GERD Detection, Tim Shee Yao
Improvement of RFID Impedance Sensor for GERD Detection, Tim Shee Yao
Low Power Transceiver and Coding for Wireless Endoscopy, Tim Shee Yao
Low Power Transceiver and Coding for Wireless Endoscopy, Tim Shee Yao
Providing Engineering Students with Culturally-Appropriate Immersion Design Experiences in Developing Countries, Lawrence D. Zavodney and Thomas J. Thompson
On Providing Engineering Students with Ministry and Culturally-Appropriate Design Experiences in Developing Countries, Lawrence D. Zavodney, Thomas J. Thompson, and Ray Hutchison
Publications from 2007
The Freshman Year in Engineering, Robert Chasnov
Cedarville University Solar Splash Technical Report 2007, M. Hubenthal and Timothy B. Dewhurst
CedarLogic - A New Graphical Digital Logic CAD Tool to Aid in the Teaching of Digital Logic Design, Clinton E. Kohl and Keith A. Shomper
Towards Automatic Photometric Correction of Casually Illuminated Documents, George V. Landon, Yun Lin, and W. Brent Seales
Petroglyph Digitization: Enabling Cultural Heritage Scholarship, George V. Landon and W. Brent Seales
Design of a RFID Transponder for Application on Security, K. Liu and Tim Shee Yao
